3D Printed ZimaBlade case for one external ssd

Finally got around to setting up the ZimaBlade with one external SSD and whipped up this design. The big empty area at the base is to allow the sata cables lots of space to bend and hopefully not apply too much pressure to the connectors. The ssd is also spaced away from the zimablade, hopefully allowing warm air to flow upwards.

You can download the objs for slicing here: zimabladeSingleSSDCase.zip

10x 8mm m3 screws will also be required to attach the parts together. You might also want some washers for a touch more pizazz.

Note that for the SSD Holder, there are counterbore holes. If you are using Orca Slicer, remember to turn on the "bridge counterbore holes" option, I used the sacrificial layer mode.